Plastic coating for bathroom − practical and inexpensive!

The special atmosphere of the bathroom dictates the trends to its design. Since the bathroom is always wet, many prefer to make out the walls with ceramic tiles. We agree that it is a classic variant, which proved to be excellent. But sometimes, the ceramic tile is boring, it is difficult to establish, it is necessary to align the walls to mess with the cement grout, etc. And what will be it costs to replace one tile another − again appears dirt, chipping, uneven walls and other contretemps.

The more convenient variant, which is not inferior to the ceramic tiles by the quality, is the plastic coatings. They started using about seven years ago. During this time, the installation technology and the quality of PVC-coatings only improved.

Plastic panels for the bathroom − it is a total plus. Most importantly, they are not afraid to temperature changes and humidity. But in the bathroom water and steam are the main destructive factors. As with the ceramic tile, the plastic coatings have a good resistance against mechanical damage. Before installing PVC-coatings in the bathroom is not necessary to align the walls simply because the very design of the panels is intended to close all the walls irregularities. This is another plus in favor of these panels.

Well, the installation process itself does not require any effort and fuss. You do not have to breed mixes, wait until all this beauty is dry. The fact that the plastic panels are attached together on the bathroom's walls using the special tool joints. The coating is installed in the skeleton racks, which are mounted on the same height as the height of one lamina of coating is. Hence, the plastic panels can close the wall in the bathroom completely, up to the ceiling, and can only be part of the wall, for example, from the floor up to the middle. And the rest part of the wall can be painted or drawn in any other way to your taste (decorative plaster). The panels are installed starting from the corner of the bathroom. Initial PVC-coating is attached to a special "aligning angle" which comes complete with all necessary equipment.

Plastic coatings are remarkable by the fact that they have the widest range of colors. And you can pick up as a monochromatic plastic, and choose a few colors that will blend harmoniously with each other. As a result of an unusual combination, the bathroom will have a unique, but simple and sleek design. All plastic coatings in appearance can be divided into two broad classes: matte and glossy. Gloss is perfectly reflected the light, suitable for both walls and ceiling. But, attention, frosted plastic panels will look faded on the ceiling.

When choosing the color of the plastic coatings it must be considered and the floor space of the bathroom. As usual, the lighter shades make the space wider, more spacious, and conversely, dark colors narrow space visually. However, plastic coatings have a shortcoming in their appearance. For example, if from the tiles can be made a picture, here with plastic paneling this will not work because they are monochromatic or, at least, with simulated wood, stone.

Plastic coating for bathroom